Posts: 8
Any 36' convertible/open owners (I'm thinking the anodes would be the same for both models) out there that can help me with the location of the main anode that gets connected to the bonding system. When I replaced the shaft & rudder anodes, I didn't see any anodes on the transom. I didn't think much about it at the time. I was looking up info on the rest of the anodes I'd need to replace and reading up on bonding. Everything seems to be bonded so not sure where it's bonding to. Now the boat is in the water. Thanks for any help you can give me.
Posts: 463
My '86 3600 Open does not have any on the transom, nor does it have bolt or bolt holes where one may have been.
Posts: 6
Trim tabs have anodes on our '89.
Posts: 106
My 1990 3600 Open has a large plate zinc on the transom.
![[-]](https://www.tiaraownersclub.com/forum/images/netpen-pro/collapse.png)