[Tiara Open] Anchor Rode Compartment Drains

[nylakeshome]

I would like to re-bed the hull drain fittings from anchor rode compartment on my 1997 31' foot open. However I'm concerned that the existing plastic drains might be brittle and break during disassembly. Searching online I cannot find any replacements. I looked at  possibly using a fuel vent however they are stainless or plated, I much prefer white plastic.  Suggestions appreciated. 

Tom

[HIGH SPIRTED]

I would like to re-bed the hull drain fittings from anchor rode compartment on my 1997 31' foot open. However I'm concerned that the existing plastic drains might be brittle and break during disassembly. Searching online I cannot find any replacements. I looked at  possibly using a fuel vent however they are stainless or plated, I much prefer white plastic.  Suggestions appreciated. 

Tom

Forespar Thru-Hull Vent # 907029 is plastic
WM # 412445
I would cut out the screen

Paul

[nylakeshome]

Fitting found 
For future reference. Tiara provided me with information on the original fitting which is available from www.marineeast.com. Part number 6202W 3/4" IMP Drain- White. 

Tom