> > > >

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Tiara 3500 Express
Offline
Jpendejo Offline
Deck Hand
**
Posts: 16
Threads: 12
Likes Given: 0
Likes Received: 0 in 0 posts
Joined: Apr 2016
Home Port: New Jersey
Vessel Info: Tiara 3500 Express 1998 Cummins 6CTA Diamond 450 turbos
#1
06-19-2017, 08:32 PM
Has anyone installed flush mount rod holders in the Gunnels?
I have a 98 3500 Express.
Share
Like Post Reply

Offline
ReelMagic Offline
Admiral
*****
Posts: 695
Threads: 13
Likes Given: 1
Likes Received: 92 in 84 posts
Joined: Dec 2010
Home Port: Kings Park, NY
Vessel Info: 2003 38' Open Cummin's 6CTA's (450 hp)
#2
06-20-2017, 04:59 AM
Yep.. I have a 2003 38 Open and installed 3 on each side.... 2 in each of the gunnels and 1 each mid way up on the rear portion of the cabin top. Used 3M 5200 to seal the exposed balsa on the gunnels and on each screw used..... faced the rear ones straight back and the forward ones at an angle so the rods face somewhat out (approx 30 degrees outboard).... M2C
[-] The following 1 user Likes ReelMagic's post:
CaptBrett (07-11-2017)
Share
Like Post Reply
Offline
bwoods94 Offline
Deck Hand
**
Posts: 28
Threads: 5
Likes Given: 34
Likes Received: 2 in 2 posts
Joined: Aug 2016
Home Port: Long Island Sound
Vessel Info: 2006 36 Tiara Open, Twin Cummins 380
#3
09-30-2017, 08:09 AM
(06-20-2017, 04:59 AM)ReelMagic Wrote: Yep.. I have a 2003 38 Open and installed 3 on each side.... 2 in each of the gunnels and 1 each mid way up on the rear portion of the cabin top. Used 3M 5200 to seal the exposed balsa on the gunnels and on each screw used..... faced the rear ones straight back and the forward ones at an angle so the rods face somewhat out (approx 30 degrees outboard).... M2C


Can you post some pics of the ones on the cabin top?


Sent from my iPhone using Tapatalk
Share
Like Post Reply
Offline
ReelMagic Offline
Admiral
*****
Posts: 695
Threads: 13
Likes Given: 1
Likes Received: 92 in 84 posts
Joined: Dec 2010
Home Port: Kings Park, NY
Vessel Info: 2003 38' Open Cummin's 6CTA's (450 hp)
#4
10-07-2017, 04:24 PM

Sorry it took so long. Needed to get to the boat and get the picture.... It's on a 38 Open[attachment=376][attachment=376]
Share
Like Post Reply
  


Possibly Related Threads...
Thread Author Replies Views Last Post
  4000 Express Swim Platform Repair Jack Aperio 3 1,206 01-01-2026, 02:03 PM
Last Post: Jack Aperio
  Adding a generator to a 3500 open Simpleg1 0 1,375 08-31-2025, 01:43 PM
Last Post: Simpleg1
  Factory Tiara Classic Hardtop jmk 33 46,641 06-08-2025, 09:22 AM
Last Post: Craig Dunlop
  4000 Express tender/davit install Jack Aperio 7 5,279 05-31-2025, 09:05 AM
Last Post: Jack Aperio
  2000 3500 Express Hardtop Hand Rails JMGCINCY2023 0 1,599 01-30-2025, 09:22 PM
Last Post: JMGCINCY2023



Users browsing this thread:
1 Guest(s)

Sponsors

Home
Search
Help
Tiara 3500 Express00