[ecsurfinglbi]

If you connected the shore water and still do not have pressure at your sinks, you have by-passed the water pump and that half of the system....so have you replaced the screens at the sink and head faucets? That screen would also be by-passed in spray mode at the kitchen sink. Maybe you picked up some sentiment that got caught in those filters.

To check if you have a leak somewhere, you can get a blow out plug for winterizing and use a small air compressor set at 20 psi and see if the pressure goes down. For venting issues, just crack open the fill cap and test.

Sent from my XT1635-01 using Tapatalk

thanks for the help - this ended up being caused by the screens at the end of faucets. Wish I would have realized that from the start!