11-13-2019, 03:03 PM
I continue to have a sediment issue in my water tank. I purchased a 3/4 in Rusco sediment trapper from the Clean Water Store- very knowledgeable folks. It spins out the sediment using the water velocity when the pump runs. It attaches to the discharge side of the pump, not suction side. No problems since installation. No more screen fouling. It also is equipped with a easy dump valve so no disassembly for cleaning required. Check it out.


![[-]](https://www.tiaraownersclub.com/forum/images/netpen-pro/collapse.png)