[jclark003]

Yes I just did this on a 43 Open. Steamed out the divits, scuffed the floor with a red scotchbrite pad, masked off the walls, cleaned everything and covered the floor with what Tiara recommended, a low luster urathane finish by Repcolite. Tiara pretty much said any good manufacturer urathane would work but I choose to use their OEM finish. Came out beautiful. I wiped a section down with tack rags, applied the varnish using a small 1/4" nap roller and tipped it with a very good cabin brush. Pour a couple ounces of urethane into a tray at a time. If the brush starts to pull just put a couple drops of mineral spirits to thin it back out. Had the entire job done in a weekend. Recommend you practice on the small floor hatches before starting the main floor. Good luck.