03-12-2020, 10:16 AM
Getting ready to install a Maxwell windless anchor where one was once installed. Wiring harness remains but the windless has been removed and a plate was installed to cover the opening. For Tiara 3100 open with Maxwell windless anchors, do they typically have model RC-8 or RC-10. The thread indicates RC-8, but I have rope/chain combination with 3/18" chain which would require the larger RC-10.
Trying to figure out if I should replace the 20" chain with 5/16" and purchase the RC-8, or go with the larger RC-10? Would really like to get some opinions. Thanks.
Trying to figure out if I should replace the 20" chain with 5/16" and purchase the RC-8, or go with the larger RC-10? Would really like to get some opinions. Thanks.
Tom
relatively new to me: 1994 Tiara 3100 Open 454 TBI Crusaders
Lifetime racing and cruising sailor throughout New England
More recent home port is upper Hudson river with our Tiara (closer to home)
relatively new to me: 1994 Tiara 3100 Open 454 TBI Crusaders
Lifetime racing and cruising sailor throughout New England
More recent home port is upper Hudson river with our Tiara (closer to home)
