11-09-2021, 09:21 AM
(This post was last modified: 11-09-2021, 09:22 AM by Misdirection.)
When I did my portlights, I left them out for about a month to let everything dry out. I'm stored inside over the winter but still covered the openings with some left over shrink wrap loosely over the opening to prevent any birds from getting in. But you also need to look for wet rot and remove / repair those areas if necessary.
I dont have any suggestions for that area of the rode locker.
Sent from my SM-A505U using Tapatalk
Sent from my SM-A505U using Tapatalk
I dont have any suggestions for that area of the rode locker.
Sent from my SM-A505U using Tapatalk
(11-09-2021, 07:35 AM)GeoDoc Wrote: My new moisture meter shows water inside the foam under one of my salon ports. I have a new gasket on the way. Should I do anything else to stop the leak?If the water intrusion continues after the new gasket, I would still rebed the portlight.
Sent from my SM-A505U using Tapatalk


![[-]](https://www.tiaraownersclub.com/forum/images/netpen-pro/collapse.png)