05-13-2015, 08:43 PM
You have and need a "Carling VLD1 lighted switch". $16.95 on eBay. I would also replace the badly corroded spade lugs on the ends of the wires. Mark all the wires carefully and make a diagram of their location. After check out I would apply a liberal coat of liquid electrical tape to stop further corrosion. Yours is a 20A switch. If you can find a 30Amp switch it would be even better.
How did you load that beautiful picture? I gave up trying.
Capt. George
How did you load that beautiful picture? I gave up trying.
Capt. George


![[-]](https://www.tiaraownersclub.com/forum/images/netpen-pro/collapse.png)