[bpro]

Smaller nuts goes on first.

"Contrary to commonly held beliefs, when assembly is complete, the half-height nut should be against the propeller hub, having been installed first, while the full-height nut is farthest from the propeller hub, having been installed last. The logic for this seemingly counterintuitive approach goes like this: when the first nut is installed and torqued down, it carries all the load or tension. When the second nut is installed against the first nut and it is torqued, much of that load or tension is transferred to the second nut. Thus, it only stands to reason that the second nut (the one that carries the majority of the load), should engage more of the propeller shaft with more threads."