|
Windshield Leak tip
|
Posts: 60
Threads: 6
Joined: Oct 2013
Reputation:
0
Home Port: Ludington, MI
Vessel Info: 31 Open, 1996 with Crusader 454 XL
Tom
Can you send the information to me a 31 open owner at bistoink@gmail.com?
thanks in advance
Posts: 1
Threads: 0
Joined: Jul 2015
Reputation:
0
Home Port: Port Sanilac Michigan
Vessel Info: Tiara 4300 Sovran, 2008 twin Volvo Penta D6 435HP with IPS-600
My wife and I own a 2008 Tiara Sovran 4300. We boat on the Great Lakes. This will be our third season with the boat.
Last season we noticed water accumulating in the groove inside the front windshield forward on the dashboard. While sitting at the dock we wouldn't notice the water however when we took the boat out and as the boat got up on plane, the water that accumulated in the groove would spill out onto the dashboard making a mess across the dash. We started to have towels ready to catch the water when we went out.
I'm thinking the seal under the black rubber seal that goes around the exterior of the windshield might have failed?
I'm wondering if the thick dish soap trick might help pinpoint the source of the leak?
Once I locate the leak what options do I have to seal it back up?
Thanks,
John
Posts: 15
Threads: 4
Joined: Feb 2017
Reputation:
0
Home Port: Lake Michigan
Vessel Info: Tiara 3100 Open 1989
Twin 454
04-27-2017, 10:43 AM
(This post was last modified: 04-27-2017, 10:52 AM by aiwa711.
Edit Reason: Email
)
Owner of a 1989 3100
Looking to replace the seals in the front window, I need help or part numbers.
Please email me info Nick@legacyflexo.com
thanks
Posts: 54
Threads: 17
Joined: Aug 2014
Reputation:
0
Home Port: Lake Ontario
Vessel Info: 2001
31 Open
8.1
Tiara has the gasket material available. I had an awful leak from the center window, thanks to the tip above I cleaned out the drain holes and after a 3 inch rain last week not a drop!
Posts: 1
Threads: 0
Joined: Aug 2017
Reputation:
0
Home Port: Ludington, mi
Vessel Info: 2000 3100 open
Could you send me the information as well. I have a 3100 open with leaking windshield.
Email shagenbach@yahoo.com
Thanks!
Posts: 7
Threads: 2
Joined: Jun 2015
Reputation:
0
Home Port: Clearwater
I recently replaced the window gaskets on my center window with gasketing purchased through Tiara. I have a '96 Tiara 31 Open. I was not successful considering that the leak still occurs near the lower left and right corners when you put a hose to the window. Not sure if I didn't install the gaskets correctly. There is a flat gasket that attaches to each side and along the bottom of the fixed frame and two L shaped gaskets attached to both sides and along the bottom. I cut the gaskets at the lower corners to allow for water to drain to the drain holes as I was afraid that the gaskets would block the holes. In retrospect I think I should have made a continuous turn at each corner. By the way, Tiara recommends that you not remove the center window. Re-installation is nearly impossible. Without the center window, you got a big leak problem!
Posts: 12
Threads: 3
Joined: Jul 2018
Reputation:
0
Home Port: New England
Vessel Info: 2000 Tiara 3500 Open w/Twin Crusader 7.4L MPI engines
I know this is an old post, but do you still have that email from Tiara about the center windshield frame? If so can you forward it to me at recppd@hotmail.com. Thanks!
(07-06-2015, 06:57 PM)trit21 Wrote: (07-06-2015, 12:37 PM)fisher.setha Wrote: We just bought a 1998 3500 Open and I'm having a similar problem, but at the top of the windshield frame. There are noticeable gaps in the frame. The window seals are fine, but the frame is leaking. I was thinking about taping one side, and trying to fill with silicon. From what I've heard this creates a mess. The problem is my helm electronics get wet when a wave comes over the windshield. Other than a full replacement, are there any suggestions?
I need you email address, I will then send you all the information that Tiara sent me about how the windshield was put together, how to take apart and replace seals and the P/N for all the seals which Tiara told me are still available from them. PM me or post here and if anyone else wants it I will also send to you, just let me know.
Posts: 1
Threads: 0
Joined: Nov 2020
Reputation:
0
Home Port: Annapolis
Vessel Info: 1985 3100. Crusader 454s.
I am working on my parents' 3100 and trying to get the windshield to stop leaking. I would love it if someone could send me any information about fixing the windshield leak. Thanks!
(06-24-2020, 09:02 PM)recppd Wrote: I know this is an old post, but do you still have that email from Tiara about the center windshield frame? If so can you forward it to me at recppd@hotmail.com. Thanks!
(07-06-2015, 06:57 PM)trit21 Wrote: (07-06-2015, 12:37 PM)fisher.setha Wrote: We just bought a 1998 3500 Open and I'm having a similar problem, but at the top of the windshield frame. There are noticeable gaps in the frame. The window seals are fine, but the frame is leaking. I was thinking about taping one side, and trying to fill with silicon. From what I've heard this creates a mess. The problem is my helm electronics get wet when a wave comes over the windshield. Other than a full replacement, are there any suggestions?
I need you email address, I will then send you all the information that Tiara sent me about how the windshield was put together, how to take apart and replace seals and the P/N for all the seals which Tiara told me are still available from them. PM me or post here and if anyone else wants it I will also send to you, just let me know.
Posts: 54
Threads: 17
Joined: Aug 2014
Reputation:
0
Home Port: Lake Ontario
Vessel Info: 2001
31 Open
8.1
11-08-2020, 09:29 AM
(This post was last modified: 11-08-2020, 09:30 AM by drifter.)
First make sure the drain holes on the outside of the windshield at the bottom are unobstructed. I used a piece of 200# mono to ream out the drains, solved my problem. This on the center portion of the windshield. From what I've read and my own experience silicone does not work.
Posts: 5
Threads: 0
Joined: Nov 2019
Reputation:
0
Home Port: Milwaukee Wisconsin
Vessel Info: 1989 Tiara 3100 Open
Twin 454 CID
(06-24-2020, 09:02 PM)recppd Wrote: I know this is an old post, but do you still have that email from Tiara about the center windshield frame? If so can you forward it to me at recppd@hotmail.com. Thanks!
(07-06-2015, 06:57 PM)trit21 Wrote: (07-06-2015, 12:37 PM)fisher.setha Wrote: We just bought a 1998 3500 Open and I'm having a similar problem, but at the top of the windshield frame. There are noticeable gaps in the frame. The window seals are fine, but the frame is leaking. I was thinking about taping one side, and trying to fill with silicon. From what I've heard this creates a mess. The problem is my helm electronics get wet when a wave comes over the windshield. Other than a full replacement, are there any suggestions?
I need you email address, I will then send you all the information that Tiara sent me about how the windshield was put together, how to take apart and replace seals and the P/N for all the seals which Tiara told me are still available from them. PM me or post here and if anyone else wants it I will also send to you, just let me know.
If anyone still has this information available could I get a copy please , I have a 1989 31 Open with a small leak in the windshield .
It drives me nuts as all the drains are wide open , and I would love to fix this .
My Email is jimcr@sbcglobal.net
|
Users browsing this thread: 1 Guest(s)
|
|
Latest Threads
|
3500 Open deck lift piston
Last Post: hiccup
Today 08:10 AM
» Replies: 4
» Views: 1101
|
Oil Filter ?
Last Post: ReelMagic
Yesterday 04:23 PM
» Replies: 7
» Views: 1617
|
Unknown noise from Tiara 3800 Open engi...
Last Post: liambrown
Yesterday 01:54 PM
» Replies: 4
» Views: 535
|
Tiara 40 Express 2003 - Removal of Cleat
Last Post: saywhen
11-14-2026 05:25 PM
» Replies: 2
» Views: 377
|
3500 Sovran trimtabs
Last Post: drprunner
11-14-2026 03:44 PM
» Replies: 0
» Views: 56
|
|