Coax must have a break.
Spotlight changed, but coax will not control light.
When I put a short temp coax between spotlight control and pad it works.
Snaking a new wire does not seem like an easy task.
Any thoughts?
06-27-2015, 06:54 AM (This post was last modified: 06-27-2015, 06:56 AM by Uhehner.)
Connect the new coax to the old coax using an inline connector and use the old coax to pull in the new one. Coax cables rarely go bad, I would look at the connectors for corrosion.
Capt. George