Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Tiara Open Skylight shade/screen repair
#1
Has anyone replaced the handles of the Oceanair skylight shade/screen ( both have snapped off). Do the new handles just snapped into groove of shade and screen? How do you remove broken part of handles which are still in the grooves of the shade and screen?
Like Post Reply

#2
(10-27-2020, 03:38 PM)Capt. Tom Wrote: Has anyone replaced the handles of the Oceanair skylight shade/screen ( both have snapped off). Do the new handles just snapped into groove of shade and screen? How do you remove broken part of handles which are still in the grooves of the shade and screen?

Funny, I just did this on my boat. I removed two pieces that were broken off with a pair of needle nose vise grips and I was able to snap the new one in without taking the whole thing apart ,it took some pressure and pushing hard but I was able to do it. Be sure you line it up in the exact spot it’s supposed to go as there are some detents that are located there.I ordered the parts from ocean air.

(10-27-2020, 04:06 PM)Donaldjames Wrote:
(10-27-2020, 03:38 PM)Capt. Tom Wrote: Has anyone replaced the handles of the Oceanair skylight shade/screen ( both have snapped off). Do the new handles just snapped into groove of shade and screen? How do you remove broken part of handles which are still in the grooves of the shade and screen?

Funny, I just did this on my boat. I removed two pieces that were broken off with a pair of needle nose vise grips and I was able to snap the new one in without taking the whole thing apart ,it took some pressure and pushing hard but I was able to do it. Be sure you line it up in the exact spot it’s supposed to go as there are some detents that are located there.I ordered the parts from Ahoy captain and found ocean air screen parts
Like Post Reply
#3
(10-27-2020, 04:06 PM)Donaldjames Wrote:
(10-27-2020, 03:38 PM)Capt. Tom Wrote: Has anyone replaced the handles of the Oceanair skylight shade/screen ( both have snapped off). Do the new handles just snapped into groove of shade and screen? How do you remove broken part of handles which are still in the grooves of the shade and screen?

Funny, I just did this on my boat. I removed two pieces that were broken off with a pair of needle nose vise grips and I was able to snap the new one in without taking the whole thing apart ,it took some pressure and pushing hard but I was able to do it. Be sure you line it up in the exact spot it’s supposed to go as there are some detents that are located there.I ordered the parts from ocean air.

(10-27-2020, 04:06 PM)Donaldjames Wrote:
(10-27-2020, 03:38 PM)Capt. Tom Wrote: Has anyone replaced the handles of the Oceanair skylight shade/screen ( both have snapped off). Do the new handles just snapped into groove of shade and screen? How do you remove broken part of handles which are still in the grooves of the shade and screen?

Funny, I just did this on my boat. I removed two pieces that were broken off with a pair of needle nose vise grips and I was able to snap the new one in without taking the whole thing apart ,it took some pressure and pushing hard but I was able to do it. Be sure you line it up in the exact spot it’s supposed to go as there are some detents that are located there.I ordered the parts from Ahoy captain and found ocean air screen parts

Did you just pull existing broken handle out of groove of shade?
Like Post Reply
#4
When mine broke off it left me with two small pieces  which were left in the guide rail. I grabbed my needle nose vice  grips and with a slight twisting motion was able  to get them both out .   When installing the new one you may want to have a helper push down on the top of the screen as you are pushing it up . Make sure you place the new one dead center and on the little tips ( I call them dentents)  this way it does not move to the left or right .  Take a look at your other shades on the boat and see what I mean .

Also if you are not comfortable doin this you can take the entire assembly down and slide the broken pieces out of the guide rail and insert the new ones.
I believe ahoy captain had a link to how this is done . I just took a chance and was able to get them installed.

[Only registered and activated users can see links Click here to register]
Like Post Reply
#5
Thanks for your advice!
Like Post Reply
  


Possibly Related Threads...
Thread Author Replies Views Last Post
  Transom Door/Gate Repair MC1600 4 3,780 08-25-2025, 10:53 PM
Last Post: Splendor
  [Tiara Open] 2005 3200 Open Gunwhale repair mlamarch44 5 1,282 05-26-2025, 08:08 AM
Last Post: TenBayFive
  Sliding salon door repair on 97 3100 Restless 1 895 11-16-2024, 08:52 PM
Last Post: bruce@bigrivergroup.com
  [Tiara Coronet] Teak and holly repair Makoman 3 1,809 01-01-2024, 09:38 PM
Last Post: jclark003
  VDO LCD Screen Replacement Newbie7749 0 985 08-21-2023, 12:02 PM
Last Post: Newbie7749



Users browsing this thread:
1 Guest(s)

Skylight shade/screen repair00