J Lounge Removal on 32 Open
#1
Trying to remove the j lounge from the upper cockpit area of my 2005 32open. I removed the 6 lags I can see from inside the storage area but to no avail the lounge is held down tight. Appears to be secured down with some sealant?? Has anyone removed the seat before any help appreciated.
        thanks   
Reply
#2
I haven't removed anything that sizable from my 98 31 Open, but I've worked around a couple of other items and found most positioned with 5200 in addition to fixed fasteners.  I've had good success with a heat gun warming the materials and using a scraper to get in the tight places to break the sealant bonds.

Good luck.
Reply
#3
A length of piano wire around two dowels can be used as a saw along with lots of WD40 to cut through a sealant. Wooden wedges for pry's also help. Capt. George
Reply
#4
Thanks for the help. Will try the piano wire.  
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  [Tiara Open] Unknown noise from Tiara 3800 Open engine room Tony Saitta 4 639 11-16-2026, 01:54 PM
Last Post: liambrown
  Tiara 40 Express 2003 - Removal of Cleat saywhen 2 463 11-14-2026, 05:25 PM
Last Post: saywhen
  [Tiara Open] 36' Open interior lights Rick B 0 121 11-14-2026, 12:22 PM
Last Post: Rick B
  [Tiara Open] Cockpit bolster removal Rick B 0 108 11-14-2026, 12:15 PM
Last Post: Rick B
  38 open bathroom recessed light bulb twilson0929 3 726 08-26-2026, 06:22 AM
Last Post: twilson0929



Users browsing this thread: 2 Guest(s)
Advertisements

>