36 ' open 2006 the spot light finish is peeling.
#1
OlUSA Flag Has anyone had any success repainting ?
Reply
#2
If your light is an ACR, contact them about refurbishing it.  They did mine about 9 years ago, and I have not had any issues since.

Good Luck.
Reply
#3
I painted my ACR with Awlgrip. wiped it down with lacquer thinner, scuffed it with a scotchbrite pad and sprayed it. looks like new. If your finish is peeling however that may require some extra prep work to get a decent finish. Either that or send it in to ACR as suggested above. Good luck
Reply
#4
My ACR paint was peeling around the base. From an aluminum body and stainless steel screws. I took it apart, stripped the case, then had it powder coated. Remounted with the screws swimming in dielectric grease. 10 years later and it still looks brand new.


Sent from my iPhone using Tapatalk
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  [Tiara Open] Unknown noise from Tiara 3800 Open engine room Tony Saitta 4 628 11-16-2026, 01:54 PM
Last Post: liambrown
  [Tiara Open] 36' Open interior lights Rick B 0 116 11-14-2026, 12:22 PM
Last Post: Rick B
  38 open bathroom recessed light bulb twilson0929 3 722 08-26-2026, 06:22 AM
Last Post: twilson0929
  Replacement of Carbon Filter on vent line from Holding Tank. 38 Open ReelMagic 1 556 08-18-2026, 02:11 PM
Last Post: hiccup
  2001 38’ Open interior table base removal twilson0929 3 1,000 07-07-2026, 08:13 AM
Last Post: hiccup



Users browsing this thread: 1 Guest(s)
Advertisements

>