Posts: 27
Threads: 0
Joined: Mar 2011
Reputation:
0
Home Port: Boca Raton, FL
Vessel Info: 2001
3500 Open
Cummins 6bta 370
If your light is an ACR, contact them about refurbishing it. They did mine about 9 years ago, and I have not had any issues since.
Good Luck.
Posts: 486
Threads: 3
Joined: Apr 2013
Reputation:
20
Home Port: Lake Michigan
Vessel Info: 52 Sovran, Cat 3406
I painted my ACR with Awlgrip. wiped it down with lacquer thinner, scuffed it with a scotchbrite pad and sprayed it. looks like new. If your finish is peeling however that may require some extra prep work to get a decent finish. Either that or send it in to ACR as suggested above. Good luck
Posts: 106
Threads: 3
Joined: Mar 2013
Reputation:
1
Vessel Info: 36 Open Hardtop, 52 Express Hardtop
My ACR paint was peeling around the base. From an aluminum body and stainless steel screws. I took it apart, stripped the case, then had it powder coated. Remounted with the screws swimming in dielectric grease. 10 years later and it still looks brand new.
Sent from my iPhone using Tapatalk