Posts: 24
Threads: 11
Joined: Jun 2013
Reputation:
1
11-29-2017, 11:36 AM
(This post was last modified: 11-29-2017, 11:38 AM by ddfour1.)
Any idea where Tiara located the AP Course Computer on this boat? I don't readily see it behind the helm, below the companionway steps or at the front of the engine room (though given the heat I would not expect to find it there). The control head is a Ray ST7001 which I believe requires a separate Course Computer located in a dry location, preferably toward the center line of the boat as low as possible.
Thanks
Dave
Posts: 8
Threads: 0
Joined: Oct 2017
Reputation:
0
Home Port: Long Island Sound
Vessel Info: Tiara 3500 Open
Cummins 370's
Check under the settee next to the stereo amp. I am almost positive that is where mine is....
Posts: 486
Threads: 3
Joined: Apr 2013
Reputation:
20
Home Port: Lake Michigan
Vessel Info: 52 Sovran, Cat 3406
Can you track the seatalk cable out of the control head back to the course computer? the power wires from the helm pump or the signal wires from the heading sensor will also lead to the CC
mine was mounted to a bulkhead right behind the dash/instrument cluster. Same year but different model boat ('01 43 open). Good luck.