Posts: 29
Threads: 8
Joined: Apr 2011
Reputation:
0
I bought a strip of LED lights and decided I could do it. It was very very simple. Total time < 2hours.
Posts: 9
Threads: 3
Joined: Nov 2011
Reputation:
0
LEDs the future of marine practical and creative lighting. Gota-a-luv-m
Posts: 6
Threads: 1
Joined: Mar 2013
Reputation:
0
Can you tell me where did you buy led strip? Is it water proof?
Thanks in advance.
Mark
1988,36 open
Posts: 29
Threads: 8
Joined: Apr 2011
Reputation:
0
I bought them from Rob at xtremeled.com They are waterproof. They have been in for over a yer and are doing great. They look as good as the day I installed them.i used gorrilla glue to mounth them as the underside was not smooth enough for double stick tape.
Posts: 494
Threads: 22
Joined: Apr 2012
Reputation:
5
Home Port: Stuart, FL
Vessel Info: 1988 36' Convertible with new 8.1 Crusaders.
Exceptional condition, inside, outside, bilges and engines.
Go to eBay and search "SMD 5050 waterproof". About $40 from China with some extra 4 conductor wire. I cut 1" square, 3/8" PVC and drilled a 1/8" vertical hole. Then I used 5200 to glue the PVC in place and small ty-wraps to hold the LED strip after the 5200 set. I used the multicolor 5M string and it was the perfect length for my 36 convertible but you need to cut it in two lengths and meet at the walk thru door. Looks great especially when the colors change automatically. They operate on 12 volts so its an easy connection to the circuit breaker panel. Comes with an IR remote.
Capt. George
Posts: 36
Threads: 8
Joined: Nov 2012
Reputation:
0
Home Port: Saugatuck MI
Vessel Info: 1988 3300 Open
Looks great - I am going to do the same -just ordered some online.
Hope you got my response on the ladder!
Steve
Posts: 29
Threads: 8
Joined: Apr 2011
Reputation:
0
FYI, I just replaced mine. After the years they seemed to dim and one side went out. They are cheap enough now, that I don't mind replacing every other year.