I need to repair/rebuild the turbos in my Detroit Diesel (Johnson & Towers) 6v92TA engines.  Can anyone point me in the right direction for a good shop that can do this (or where I can send the cores and get rebuilt turbos in exchange)?

Thanks,

Francisco
furiarte@espadvisers.com

Fresh-water Tiara 3600 Convertible now available and on display in our showroom. "Mitchagain"  features the comfortable appointments and superior quality found in each Tiara, plus the convenient dinette floorplan with single private stateroom forward. This Tiara was recently repowered with a pair of freshly remanufactured Mercruiser inboard engines by Jasper, with less than 40 hours since the replacement (total hull hours approx . 1080).

See Complete details, photos and video: https://pier33.news/Tiara3600.


The master stateroom features a pedestal berth, hanging lockers, hatch overhead and private access from the stateroom to the head compartment.  The comfortable salon is brightened by a full windshield. A very spacious cockpit allows plenty of room for dockside entertaining or Great Lakes angling. The flybridge is outfitted with an impressive command console, twin pedestal seats and a large forward bench.

EQUIPMENT HIGHLIGHTS INCLUDE:

• T-340 HP MERC INBOARDS W/ FRESH-WATER COOLING AND 32 HOURS SINCE REPOWER.
  
  
• WESTERBEKE 8.5 KW GENSET WITH 387 HOURS
  
  
• ORIGINAL ELECTRONICS PACKAGE INCLUDING FUNCTIONING RADAR, AUTOPILOT, DEPTH AND VHF
  
  
• AIR CONDITIONING W/ REVERSE CYCLE HEAT, 2 UNITS
  
  
• CENTRAL VAC
  
  
• FLYBRIDGE ENCLOSURE
  
  
• MANY OWNER UPDATES AND MAINTENANCE
  

.and much more!

---

Here is the link to view complete info: [Only registered and activated users can see links Click here to register].

Tighe Curran
Pier 33 Yacht Brokerage
(269) 287-3021

Hello-

Posted this in boat parts but believe this to be a more fitting place.
Trying to locate the window gasket material for an 89 3600 convertible.
The window is non opening, sits at the rear of the salon next to the slider and is roughly 4 by 4ft.
Aluminum frame.
Any source help is appreciated as gasket has lived its life!

Thanks in advance, Dan

Hello-

Trying to source the rubber window gasket for the rear fixed window on an 89 3600 convertible.  The window is on the rear of the salon, under bridge ladder, next to the slider.  It is roughly 4 X 4 ft with an aluminum frame.  Any source help is appreciated.

Thanks in advance, dan

Trying to find the entry point for rainwater that ends up in bilge. Found a couple minor sources at electric cablemaster area (port) and fresh water in fitting (starboard) but getting much more water than that in bilge.  It collects at mid bilge pump and will be 3+ gallons or so after a good rain or really thorough washing. Any hints for suspect areas based on your experience?

Building a new Tiara 38LS. Wondering if any other owners can give me an thoughts about the boat. Is the Tiara what they claim
to be and how is resale compaired to other high end boats.
Would you buy it again ?

Hello all and thanks for letting me join,

I recently bought a '93 3100 that had just been repowered with C7.1 Cats and new ( in 2021 ) 
Garmin 942 xvs's for bottom and gps. I am now considering getting a Garmin Fantom 24x radar and using a 1042 xvs for the radar display.

I have a flybridge and fabric top over the main helm station. The old radar was mounted at the front of the fabric top under the floor of the flybridge. Does anyone have any experience with this setup? If so, do you have any advice on correct mounting angle of the radar? Is there an app for an ipad that would allow me to mount a pad on the bridge (when in use) that would eliminate all the wiring needing to be fished through the tower legs?

The radar would be primarily for close navigation and safety. I'm going to use binoculars for birds. Lower Chesapeake Bay VA.

Thanks in advance,

Stuart

My 2005 gauges are working but no brightness or contrast adjustment. Any recommendations for a reliable repair shop? Thanks

I have a pair of 3-blade, 26" diameter x 30" pitch, 2.25" shaft propellers for sale.  They came off a 43 Convertible.   Located in Cleveland, OH but I can arrange shipping.  

Thanks,

Christian Tracey
(216) 798-6212

Fit the master bunk of a ‘99 4000 Express, but is adjustable so can be shrunk down. The important part here is it’s the correct coffin shape. 

Two set of sheets with pillow cases. Retail for about $250 each. I’d let them both go for $200 total. No tears or frays. Colors are light and dark tan. 

I cannot get a pic to post, but am happy to send if you PM me or text 7zero3-two82-3five37.

Matt