07-04-2023, 05:14 PM
(This post was last modified: 07-04-2023, 05:18 PM by ReelEnjoyment.)
Sorry I did not see your question until today .
The chopper motor can be rotated on the bowl base 4 bolt mount.
The back of the bulkhead has a sharp angle and a small shelf for the head to sit on (probably due to sharing the same space with the shower)
I installed the head raw water supply pump on the bulkhead under the sink.
And had to adapt the 1 1/2 " discharge hose to 1",other than rotating the chopper motor and drilling new holes it was plug and play.
I hate drilling holes in my boat.
The chopper motor can be rotated on the bowl base 4 bolt mount.
The back of the bulkhead has a sharp angle and a small shelf for the head to sit on (probably due to sharing the same space with the shower)
I installed the head raw water supply pump on the bulkhead under the sink.
And had to adapt the 1 1/2 " discharge hose to 1",other than rotating the chopper motor and drilling new holes it was plug and play.
I hate drilling holes in my boat.
![[-]](https://www.tiaraownersclub.com/forum/images/netpen-pro/collapse.png)