Posts: 15
Threads: 4
Joined: Feb 2018
Reputation:
0
Home Port: Marblehead
Vessel Info: 96 Tiara 31 Open, Crusader
I have a 1996 31 Open and the boatyard says I need to replace my sanitation hoses, which could be original. OK, not so bad BUT they say they have to remove parts from the port engine to do so. Sounds crazy, but has anyone done this and have some experience? Any input would be appreciated.
Posts: 229
Threads: 45
Joined: Dec 2016
Reputation:
2
Home Port: Long Island Sound
Vessel Info: 3100 Open, 2002 Model Year, 8.1L Crusaders
What kind of system to you have. If your 31 is like mine then your holding tank is on the port side behind the engine. I can see them having to take off the exhaust elbow or the oil filter mount. Even the exhaust hose if your vacuflush generation tank is where mine is. This is a project I will be tackling this off season.
Posts: 29
Threads: 3
Joined: Jan 2019
Reputation:
0
Home Port: Detroit yacht club
Vessel Info: 1999 35 open
Twin 454 crusaders, mpi
Got a couple big engines squeezed in there. Doesn’t surprise me.
I took off the filter thou, just something that plugs up. Not needed if you keep it treated and pumped out.
ISBIB
Posts: 702
Threads: 14
Joined: Dec 2010
Reputation:
11
Home Port: Kings Park, NY
Vessel Info: 2003 38' Open Cummin's 6CTA's (450 hp)
I agree on the removal of the filter although I would recommend you replace it with a new one.... One thing that has come up numerous times on the site is if the holding tank fills to the point liquid gets into the filter its finished and either needs to be replaced/removed..... M2C
