Posts: 8
Threads: 3
Joined: Mar 2022
Reputation:
0
Home Port: Bay river NC
Vessel Info: 2005 Limited 3100
Cummins
After moving on plane there is a beeping sound all gages are normal
After decreasing speed sound will slow down and stop when Idling
Posts: 398
Threads: 37
Joined: Jun 2020
Reputation:
3
Home Port: Annapolis, MD
Vessel Info: Currently looking
Is it the same sound you get when you first start up? If so, I’d start with examining oil pressure. Don’t trust the gauges at the helm and toss a mechanical gauge on the motor to rule that out.
Posts: 8
Threads: 3
Joined: Mar 2022
Reputation:
0
Home Port: Bay river NC
Vessel Info: 2005 Limited 3100
Cummins
Thanks for info. When I tip console back two alarms one on starboard one on port right side alarms when keys are on port side is the alarms while underway
Posts: 463
Threads: 3
Joined: May 2018
Reputation:
7
Home Port: Ashtabula, OH
Vessel Info: 1986 Tiara 3600 Open, Crusader 454's
Not knowing what motors you have, but if you have gas motors, the engine alarm goes off for one of three reasons.
Oil pressure, engine temp, or transmission temp.
First things first. Check your oil, and transmission fluid levels. If their fresh water cooled, check antifreeze levels.
Sent from my SM-S901U using Tapatalk
Posts: 8
Threads: 3
Joined: Mar 2022
Reputation:
0
Home Port: Bay river NC
Vessel Info: 2005 Limited 3100
Cummins
6bta5.19 Cummins
I’ll check what you said thank you
Posts: 463
Threads: 3
Joined: May 2018
Reputation:
7
Home Port: Ashtabula, OH
Vessel Info: 1986 Tiara 3600 Open, Crusader 454's
Ok, I'm not sure anything I provided applies to diesel's, but that would still be a good place to start.
Sent from my SM-S901U using Tapatalk
Posts: 8
Threads: 3
Joined: Mar 2022
Reputation:
0
Home Port: Bay river NC
Vessel Info: 2005 Limited 3100
Cummins
Thanks to all it was a loose ground bus bar
Regards