by mc307tank at 08-05-2024, 05:49 PM
1 comments
1988 Tiara 3100 Open $45,000, less than 1400 hours both motors, comes with 4 Cannon Tournament down riggers, Apex 19 Mega S+ Chartplotter, Fish Hawk, Harmon Kardon stereo. seats in stern were removed (still have) to accommodate fishing, carbs less than 3 years old, boat has always been in heated storage, interior wall cloth replaced, new duckbills, fridge and microwave 2 years ago. Waxed this year, and the second season for new bottom paint. I have a hardtop for it (Atlantic hardtop) not installed and all the autopilot equipment from Humminbird (not installed). Hate to sell her but medical issues necessitate it. Did tons of little things to boat based on the survey three winters ago. Currently it is set up for sleeping with a custom mattress (not included in sale) where the table goes. Fishing gear, downrigger poles, lures etc. goes with boat. Has newer AC unit. Currently in the water in East Harbor Lake Eerie and available for viewing and sea trials in 3 weeks, Ted
All records of maintenance and old survey's go with the boat
All records of maintenance and old survey's go with the boat
by peakay at 08-05-2024, 10:48 AM
6 comments
Hi there,
I'm looking at a couple Tiara 3300's as a move up from our 2700, but the bed just seems so darn small, even with the extension pulled out.
How has this bed worked for you? Any way to make it larger?
Thanks!
![[Image: attachment.php?aid=1403]](https://www.tiaraownersclub.com/forum/attachment.php?aid=1403)
I'm looking at a couple Tiara 3300's as a move up from our 2700, but the bed just seems so darn small, even with the extension pulled out.
How has this bed worked for you? Any way to make it larger?
Thanks!
by fkrabach at 08-05-2024, 10:17 AM
2 comments
I've searched this group and the web fairly intensely and have so far come up empty. Can anyone help identify the plumbing in my 1984 2600 Continental or advice on adapters etc.. it appears that I have a cracked 90° elbow on the supply to the galley faucet. I tried off the shelf quick connect fittings but the sizes don't seem to match up. I believe the line is 3/8" OD but that's just an eyeball. I haven't physically measured it yet. Thanks!
by JMGCINCY2023 at 08-04-2024, 07:04 PM
4 comments
Where is the Dinette Filler Cushion supposed to be stored. I could not find it in the owners manual.
Thanks
Thanks
by JMGCINCY2023 at 08-04-2024, 06:58 PM
0 comments
Has anyone added a cockpit table to a 3500 Express. I've see some pictures of a floor mounted and one that attached to the rear seat. I have the equipment to fabricate the table top. What would be the best location and best way to mount.
Thanks
Thanks
by JMGCINCY2023 at 08-02-2024, 09:08 PM
2 comments
Our new to us 2000 3500 Express was delivered today from MI to Cincinnati, OH. When we looked at her prior to the purchase, the cockpit fridge operated and checked ok by our survey. I think the breaker is popped. I checked the outlet box next to the fridge on the wall and no power. I pushed the outlet reset and no power. Is there a breaker located somewhere that I need to find. Thanks, Mike.
by Showtime at 08-02-2024, 11:33 AM
2 comments
I have a 1994 2900 Open. The front windshield that opens needs new seals. There appears to be two different sizes. They are some kind of rubber and I can't find anything that fits and the foam rubber won't hold up. HELP!!!
by MR Lee at 08-01-2024, 09:21 PM
0 comments
by Gpersi at 08-01-2024, 05:10 PM
2 comments
I just changed my risers on Crusader 7.4 Tiara 31 open for preventive maintenance once we put a load on it and got up to cruise. The freshwater side on the port engine would start to overheat Then mechanic said change the raw water pump impeller's and thermostat we ran happened again the engine still started to run hot thought maybe it was low on cooling and coolant topped off. Ran the boat again with the hatch open and then observed coolant coming out the overflow and the hose going to the exhaust manifold was very hot about 187 on the heat gun. The mechanic is saying, maybe we need to have the heat exchanger sent out and checked out which I don’t have a problem doing I just don’t want to keep trying things and spending money if that’s not the case any ideas?
by Scott1981 at 08-01-2024, 11:32 AM
1 comments
Does anyone know the brand rod holder Tiara used? They have what looks to be a fish logo on them
