by bnr@dur-a-flex.com at 08-18-2024, 06:51 AM
4 comments
I am in the market for new props and wanted to see if anyone has feedback on the best size, number of blades for a 4300 Open, year 2000, with 3196 CAT engines. Right now I am running 3 blade props 27x36 with a full cup.
Heard if I go to a 4 blade option I could pick up some mid range speed and smoothest.
Heard if I go to a 4 blade option I could pick up some mid range speed and smoothest.
by JMGCINCY2023 at 08-17-2024, 07:07 PM
5 comments
Today, everything was working fine on shore power then the dock pedastool went dead. Only mine. We could not get the dock breakers to reset. Being 90 degrees, we started the generator per the manual and both AC's plus everything else ran perfect. We finally got the dock power to reset but did not plug the cable in. We shut down the generator per instructions and reconnected the shore power step by step correctly. Now the AC's will not turn on. The panel gages show we have full shore power coming into the cabin panel. Fridge and other appliance panel switches light up and work. Battery chargers are working. Are there other breakers we are missing. We have some pretty experienced dock mates but they are stumped too. We are running one 30 amp cable with a splitter. I've tried to run two 30 amp cables but only one will work.
Thanks, Mike
Thanks, Mike
by 4gallaghers at 08-15-2024, 08:11 AM
2 comments
Good Morning,
My husband and I are new owners of a 2900 classic. According to the literature there should be a sink and stove cover located in the aft section of the hanging closet. It seems to be missing. I was wondering if anyone had a picture of what it looks like as we are going to try and make something. Or if someone else made a cover a picture or description.
My husband and I are new owners of a 2900 classic. According to the literature there should be a sink and stove cover located in the aft section of the hanging closet. It seems to be missing. I was wondering if anyone had a picture of what it looks like as we are going to try and make something. Or if someone else made a cover a picture or description.
by timstraker at 08-12-2024, 12:25 PM
0 comments
Hi, anyone on a 39C or 44C had problems with their sunroof? Mine is manual on the 39, which I love for simplicity sake. Was in some rough water and it seems to either be off track, or cable is too loose on the mechanics under the handle plate. Makes horrible rubbing/grinding sound, and pins don't both deploy in open position. I got it to close with both pins deploying on each side, but barely. My yard is looking at it next week, but thought someone might have had similar issues and have advice. thanks!
by timstraker at 08-12-2024, 12:13 PM
3 comments
Still getting used to it, but love it so far. Previous boat was 2015 Beneteau GT49, and before that a 2008 39 Sovran.
There used to be a source for extra soft goods (decorative pillows, sheets, etc) but can't seem to find it. Anyone know?
There used to be a source for extra soft goods (decorative pillows, sheets, etc) but can't seem to find it. Anyone know?
by JMGCINCY2023 at 08-11-2024, 07:31 PM
5 comments
The wiper blades look a bit different than what one would normally see on a vehicle. The manual does not give a size or type. Also, my washer fluid does work but the the manual does not say where the bottle is to fill it. Any ideas?
Thanks, Mike
Thanks, Mike
by Ewilder at 08-11-2024, 04:12 PM
2 comments
Just bought a 2014 Tiara 31 Coronet.
Just learning how things work. Does anyone know what this switch under the two ignitions is for?
Thanks!
Just learning how things work. Does anyone know what this switch under the two ignitions is for?
Thanks!
by NPCP-SP at 08-07-2024, 05:53 PM
2 comments
Hi, does anyone know where I can find replacements for these small metal vent covers for my 98' 2900 Coronet?
Thank you!
Thank you!
by lewisduk85@yahoo.com at 08-06-2024, 06:11 AM
2 comments
Need some help trying to figure out what kind of stripper I need for my Maxwell windlass.
I have a 1999 37 open and my Maxwell windlass plastic stripper broke. I’m assuming it’s the RC800 series can anybody help?
I have a 1999 37 open and my Maxwell windlass plastic stripper broke. I’m assuming it’s the RC800 series can anybody help?
by JMGCINCY2023 at 08-05-2024, 07:16 PM
5 comments
The Cockpit Fridge and adjoining plug outlet worked on our new to us 2000 3500 Express two weeks ago when the survey was done. After trucking it down from MI, neither work. Everything else on the boat operates. Is there a hidden breaker or something we have not been able to find?
Thanks, Mike
Thanks, Mike
