06-13-2016, 05:48 PM
(This post was last modified: 06-13-2016, 05:50 PM by Freedomskeeper.)
(06-13-2016, 06:08 AM)Uhehner Wrote: I suggest you also change that rusty hose clamp while you are there. Use a magnet to make sure the clamp is all stainless.
Capt. George
All clamps were replaced. I should have noted that the picture was of one of the old coolers. I also cleaned surface corrosion and applied a rust inhibiting coating where needed.


![[-]](https://www.tiaraownersclub.com/forum/images/netpen-pro/collapse.png)